To install StudyMoose App tap and then “Add to Home Screen”
Save to my list
Remove from my list
In this experiment, we aimed to determine the percentage of acetic acid in vinegar through a titration process using sodium hydroxide as the titrant. The reaction was monitored using phenolphthalein as an indicator. We conducted two trials to ensure the accuracy of our results and calculated the percent acetic acid in vinegar. We also assessed the sources of random errors and discussed potential improvements for future experiments.
Vinegar is a common household product with a known concentration of acetic acid.
This experiment's objective is to determine the percent acetic acid in vinegar by titrating it with a standardized solution of sodium hydroxide. The reaction can be represented as:
CH3COOH (acetic acid) + NaOH (sodium hydroxide) → CH3COONa (sodium acetate) + H2O (water)
The phenolphthalein indicator is used to detect the endpoint of the reaction, which occurs when all the acetic acid has reacted with sodium hydroxide, resulting in a color change from pink to colorless. The moles of sodium hydroxide used in the titration should theoretically be equal to the moles of acetic acid present in the vinegar.
Verified writer
Proficient in: Chemistry
5 (339)
“ KarrieWrites did such a phenomenal job on this assignment! He completed it prior to its deadline and was thorough and informative. ”
Using this information, we can calculate the percent acetic acid in vinegar.
Materials:
Methods:
The experimental procedure consisted of the following steps:
| Trial | Volume used (mL ± 0.10 mL) | Moles of acetic acid | Mass of acetic acid | Percent acetic acid in vinegar | Percent error |
|---|---|---|---|---|---|
| 1 | 25.50 | 0.00255 | 0.045 g | 4.50% | 10.00% |
| 2 | 26.20 | 0.00262 | 0.046 g | 4.60% | 8.00% |
In Trial 1, we used 25.50 mL of sodium hydroxide solution.
To calculate the moles of acetic acid, we multiplied this volume by the previously determined molarity of sodium hydroxide, which was 0.100 mol/L. Assuming that the moles of OH- equals the moles of H+, we calculated the mass of acetic acid by multiplying the moles by the molar mass of acetic acid. Finally, we determined the percent acetic acid in vinegar by dividing the mass of acetic acid by the mass of the vinegar and multiplying by 100.
The random error associated with the molarity of the sodium hydroxide solution from the previous lab was 4.77%. We calculated the uncertainty in the volume, moles, and mass of acetic acid accordingly. The final result was 4.50% with an uncertainty of 0.273%, resulting in a percent error of 10.00% compared to the accepted value of 5%.
In Trial 2, we used 26.20 mL of sodium hydroxide solution. The results for Trial 2 are shown in the table above.
Our analysis shows that the percent acetic acid in vinegar is approximately 4.55% with an uncertainty of 0.273% for Trial 1 and 4.60% for Trial 2. The total percent error is 10.00% for Trial 1 and 8.00% for Trial 2. These values are higher than the accepted value of 5%, indicating that systematic errors may have affected our results.
One source of error is the reaction of sodium hydroxide with carbon dioxide in the air, which can reduce the concentration of sodium hydroxide and lead to an underestimate of the moles of acetic acid. To mitigate this, future experiments should be conducted in a closed system to prevent the influence of atmospheric carbon dioxide.
Another potential source of error is the choice of indicator. Phenolphthalein turns pink at a pH range of 8.2-10.0, which may result in premature color change during the titration. Using different indicators with higher pH ranges or conducting multiple trials with various indicators can help verify the endpoint more accurately.
In conclusion, we determined that the percent acetic acid in vinegar is approximately 4.55% for Trial 1 and 4.60% for Trial 2. Our total percent error is higher than the accepted value of 5%, indicating potential systematic errors in our experiment. Further investigations are needed to improve the accuracy of our results.
Based on our findings, we recommend the following for future experiments:
These improvements can help further enhance the precision and reliability of percent acetic acid determinations in vinegar.
Lab Report: Determination of Percent Acetic Acid in Vinegar. (2017, Nov 11). Retrieved from https://studymoose.com/document/determinating-the-percent-acetic-acid-in-vinegar-using-titration
👋 Hi! I’m your smart assistant Amy!
Don’t know where to start? Type your requirements and I’ll connect you to an academic expert within 3 minutes.
get help with your assignment
