To install StudyMoose App tap and then “Add to Home Screen”
Save to my list
Remove from my list
The objective of this experiment was to investigate the impact of surface area on the rate of dissolving of Alka-Seltzer tablets.
Two factors were explored: whole Alka-Seltzer tablets and crushed Alka-Seltzer tablets. The hypothesis was that the crushed Alka-Seltzer tablets would dissolve faster due to their increased surface area. To control the experiment, factors such as water temperature, the number of tablets used, and the amount of water in each cup were carefully regulated. The collision theory and the role of catalysts in reaction rate enhancement were also discussed.
The results supported the hypothesis, demonstrating that surface area does affect the dissolving rate of Alka-Seltzer tablets.
Dissolving is a common chemical process that occurs when a solute (in this case, Alka-Seltzer tablets) is mixed with a solvent (water) to form a homogeneous solution. The rate at which a solute dissolves can be influenced by various factors, one of which is surface area. Surface area plays a significant role in the rate of dissolving because it affects the frequency of collisions between solute particles and solvent molecules, a key concept in collision theory.
The collision theory proposes that for a chemical reaction to occur, reactant particles must collide with sufficient energy and in the correct orientation.
Verified writer
Proficient in: Chemistry
4.7 (348)
“ Amazing as always, gave her a week to finish a big assignment and came through way ahead of time. ”
Increasing the surface area of a reactant, in this case, the Alka-Seltzer tablet, can lead to more frequent collisions between its particles and water molecules, ultimately speeding up the dissolving process. Additionally, catalysts can enhance reaction rates by lowering the activation energy required for the reaction to proceed.
In this experiment, we aimed to investigate whether surface area affects the dissolving rate of Alka-Seltzer tablets. We compared the time it took for whole Alka-Seltzer tablets and crushed Alka-Seltzer tablets to dissolve in water. The hypothesis was that crushed tablets, with their increased surface area, would dissolve more quickly due to more frequent collisions between their particles and water molecules.
Materials:
Experimental Procedure:
| Time for Crushed Alka-Seltzer (s) | Time for Whole Alka-Seltzer (s) | |
|---|---|---|
| Trial 1 | 21.86 | 29.15 |
| Trial 2 | 23.52 | 35.33 |
The experiment investigated two factors: surface area and the type of Alka-Seltzer tablet. The results clearly demonstrate that surface area has a significant impact on the dissolving rate of Alka-Seltzer tablets. The crushed Alka-Seltzer tablets dissolved faster than the whole tablets in both trials. This outcome aligns with our hypothesis, which proposed that increased surface area would lead to a quicker dissolution due to more frequent collisions between solute particles and solvent molecules.
During the experiment, several factors needed to be controlled to ensure accurate results. The temperature of the water was monitored using a thermometer to guarantee that both trials were conducted with water at the same temperature. Consistency was maintained by using only one Alka-Seltzer tablet per cup, and equal amounts of water were poured into each cup.
The collision theory provides insights into the observed results. According to this theory, for a successful collision to occur, reactant particles must possess enough kinetic energy and collide in the appropriate orientation. By crushing the Alka-Seltzer tablet, we increased its surface area, which allowed for more collisions between the tablet particles and water molecules. These increased collisions provided a greater chance for successful collisions, resulting in faster dissolving. In contrast, the whole tablet had a smaller surface area, resulting in fewer collisions and a slower dissolution rate.
Catalysts, although not used in this experiment, play a crucial role in enhancing the rate of many slow reactions. Catalysts work by lowering the activation energy required for a reaction to proceed. They provide an alternative reaction pathway with a lower energy barrier, allowing more particles to possess the necessary energy for successful collisions. While catalysts were not a part of this experiment, their role in accelerating reactions can be related to the concept of surface area. Just as increasing surface area leads to more collisions and faster dissolving, catalysts facilitate reactions by making it easier for reactant particles to collide with sufficient energy.
In conclusion, this experiment demonstrated that surface area significantly affects the dissolving rate of Alka-Seltzer tablets. Crushed Alka-Seltzer tablets dissolved faster than whole tablets, confirming our hypothesis. The results were consistent across two trials, indicating the reliability of the findings.
Furthermore, the experiment highlighted the importance of controlling various factors, such as water temperature, the number of tablets used, and the amount of water in each cup, to ensure the accuracy of results in scientific experiments.
Based on the findings of this experiment, it is recommended to consider the surface area when using Alka-Seltzer tablets for specific applications where the rate of dissolution is a critical factor. Understanding how surface area influences dissolving can be valuable in fields such as pharmaceuticals and chemistry, where precise control of reaction rates is essential.
Effect of Surface Area on the Dissolving of Alka-Seltzer Tablets. (2016, Mar 05). Retrieved from https://studymoose.com/document/6-05-rate-and-collision-theory
👋 Hi! I’m your smart assistant Amy!
Don’t know where to start? Type your requirements and I’ll connect you to an academic expert within 3 minutes.
get help with your assignment
