24/7 writing help on your phone
Such forecasts are crucial since companies must begin building new generating plants five to ten years before they are to come on line. But during the 1975–1985 period, load actually grew at only a 2% rate. Despite the postponement or cancellation of many projects, the excess generating capacity has hurt the industry financial situation and led to higher customer rates. ? The petroleum industry invested $500 billion worldwide in 1980 and 1981 because it expected oil prices to rise 50% by 1985. The estimate was based on forecasts that the market would grow from 52 million barrels of oil a day in 1979 to 60 million barrels in 1985.
Instead, demand had fallen to 46 million barrels by 1985. Prices collapsed, creating huge losses in drilling, production, refining, and shipping investments. Bill Barnett is a principal in the Atlanta office of McKinsey & Company. He is a leader of the firm’s Microeconomics Center, and his client work has focused on business unit and corporate strategy. ? In 1983 and 1984, 67 new types of business personal computers were introduced to the U.
S. market, and most companies were expecting explosive growth. One industry forecasting service projected an installed base of 27 million units by 1988; another predicted 28 million units by 1987.
In fact, only 15 million units had been shipped by 1986. By then, many manufacturers had abandoned the PC market or gone out of business altogether. The inaccurate suppositions did not stem from a lack of forecasting techniques; regression analysis, historical trend smoothing, and others were available to all the players. Instead, they shared a mistaken fundamental assumption: that relationships driving demand in the past would continue unaltered.
The companies didn’t foresee changes in end-user behavior or understand their market’s saturation point.
None realized that history can be an unreliable guide as domestic economies become more international, new technologies emerge, and industries evolve. As a result of changes like these, many managers have come to distrust traditional techniques. Some even throw up their hands and assume that business planning must proceed without good demand forecasts. I disagree. It is possible to develop valuable insights into future market conditions and demand levels based on a deep understanding of the forces behind total-market demand. These insights can
Copyright 1988 by the President and Fellows of Harvard College. All rights reserved. sometimes make the difference between a winning strategy and one that flounders. A forecast of total-market demand won’t guarantee a successful strategy. But without it, decisions on investment, marketing support, and other resource allocations will be based on hidden, unconscious assumptions about industrywide requirements, and they’ll often be wrong. By gauging total-market demand explicitly, you have a better chance of controlling your company’s destiny.
Merely going through the process has merit for a management team. Instead of just coming out with pat answers, numbers, and targets, the team is forced to rethink the competitive environment. Total-market forecasting is only the first stage in creating a strategy. When you’ve finished your forecast, you’re not done with the planning process by any means. There are four steps in any total-market forecast: 1. Define the market. 2. Divide total industry demand into its main components. 3. Forecast the drivers of demand in each segment and project how they are likely to change. . Conduct sensitivity analyses to understand the most critical assumptions and to gauge risks to the baseline forecast. Defining the Market At the outset, it’s best to be overly inclusive in defining the total market. Define it broadly enough to include all potential end users so that you can both identify the appropriate drivers of demand and reduce the risk of surprise product substitutions. The factors that drive forecasts of total-market size differ markedly from those that determine a particular product’s market share or product-category share.
For example, total-market demand for office telecommunications products nationally depends in part on the number of people in offices and their needs and habits, while total demand for PBX systems depends on how they compare on price and benefits with substitute products like the local telephone company’s central office switching service. Beyond this, demand for a particular PBX is a function of price and benefit comparisons with other PBXs. In defining the market, an understanding of product substitution is critical. Customers might behave differently if the price or performance of potential substitute products changes.
One company studying total demand for industrial paper tubes had to consider closely related uses of metal and plastic tubes 4 to prevent customer switching among tubes from biasing the results. Understand, too, that a completely new product could displace one that hitherto had comprised the entire market—like the electronic calculator, which eliminated the slide rule. For a while after AT&T’s divestiture, the Bell telephone companies continued to forecast volume of long-distance calls by using historical trend lines of their revenues—as if they were still part of a monopoly.
Naturally, these forecasts grew more inaccurate with time as end users were presented with new choices. The companies are now broadening their market definitions to take account of heightened competition from other longdistance carriers. There are several ways you can make sure you include all important substitute products (both current and potential). From interviews with industrial customers you can learn about substitutes they are studying or about product usage patterns that imply future switching opportunities.
Moreover, market research can lead to insights about consumer products. Speaking with experts in the relevant technologies or reviewing technological literature can help you identify potential developments that could threaten your industry. Finally, careful quantification of the economic value of alternative products to different customers can yield deep insights into potential switching behavior—for example, how oil price movements would affect plastics prices, which in turn would affect plastic products’ ability to substitute for metal or paper.
Analyses like these can lead to the construction of industry demand curves—graphs representing the relationship between price and volume. With an appropriate definition, the total-industry demand curves will often be steeper than demand curves for individual products in the industry. Consumers, for example, are far more likely to switch from Maxwell House to Folgers coffee if Maxwell House’s prices increase than they are to stop buying coffee if all coffee prices rise. In some cases, managers can make quick judgments about market definition.
In other cases, they’ll have to give their market considerable thought and analysis. A total-market forecast may not be critical to business strategy if market definition is very difficult or the products under study have small market shares. Instead, your principal challenge may be to understand product substitution and competitiveness. One company analyzed the potential market for new consumer food cans, and it concluded that growth trends in food product markets were not critical to the strategy question. What was critical was knowing the value positions of the new packagesJuly–August 1988 elative to metal cans, glass jars, and composite cans. So the company spent time on that subject. Dividing Demand into Component Parts The second step in forecasting is to divide total demand into its main components for separate analysis.
There are two criteria to keep in mind when choosing segments: make each category small and homogeneous enough so that the drivers of demand will apply consistently across its various elements; make each large enough so that the analysis will be worth the effort. Of course, this is a matter of judgment. You may find it useful in aking this judgment to imagine alternative segmentations (based on enduse customer groups, for example, or type of purchase). Then hypothesize their key drivers of demand (discussed later) and decide how much detail is required to capture the true situation. As the assessment continues, managers can return to this stage and reexamine whether the initial decisions still stand up. Managers may wish to use a ‘‘tree’’ diagram like the accompanying one constructed by a management team in 1985 to study demand for paper. In this disguised example, industry data permitted the division of demand into 12 end-use categories.
Some categories, like business forms and reprographic paper, were big contributors to total consumption; others, such as labels, were not. One (other converting) was fairly large but too diverse for deep analysis. The team focused on the four segments that accounted for 80% of 1985 demand. It then developed secondary branches of the tree to further dissect these categories and to determine their drivers of demand. It analyzed the remaining segments less completely (that is, via a regression against broad macroeconomic trends).
Other companies have used similar methods to segment total demand. One company divided demand for maritime satellite terminals by type of ship (e. g. , seismic ships, bulk/cargo/container ships). Another divided demand for long-distance telephone service into business and residential customers and then subdivided it by usage level. And a third segmented consumer appliances into three purchase types—appliances used in new home construction, replacement appliance sales in existing homes, and appliance penetration in existing homes.
In thinking about market divisions, managers need to decide whether to use existing data on segment sizes or to commission research to get an independent estimate. Reliable public information on historHARVARD BUSINESS REVIEW July–August 1988 ical demand levels by segment is available for many big U. S. industries (like steel, automobiles, and natural gas) from industry associations, the federal government, off-the-shelf studies by industry experts, or ongoing market data services. For some foreign markets and less well-researched industries in the United States, like the labels industry, you may have to get independent estimates.
Even with good data sources, however, the readily available information may not be divided into the best categories to support an insightful analysis. In these cases, managers must decide whether to develop their forecasts based on the available historical data or to undertake their own market research programs, which can be timeconsuming and expensive. Note that while such segmentation is sufficient for forecasting total demand, it may not create categories useful for developing a marketing strategy. A single product may be driven by entirely different factors.
One study of industrial components found that consumer industry categories provided a good basis for projecting total-market demand but gave only limited help in formulating a strategy based on customer preferences: distinguishing those who buy on price from those who buy on service, product quality, or other benefits. Such buying-factor categories generally do not correlate with the customer industry categories used for forecasting. A strong sales force, however, can identify customer preferences and develop appropriate account tactics for each one. Forecasting the Drivers of Demand
The third step is to understand and forecast the drivers of demand in each category. Here you can make good use of regressions and other statistical techniques to find some causes for changes in historical demand. But this is only a start. The tougher challenge is to look beyond the data on which regressions can easily be based to other factors where data are much harder to find. Then you need to develop a point of view on how those other factors may themselves change in the future. An end-use analysis from the commodity paper example, reprographic paper, is shown in the accompanying chart.
The management team, using available data, divided reprographic paper into two categories: plain-paper copier paper and nonimpact page printer paper. Without this important differentiation, the drivers of demand would have been masked, making it hard to forecast effectively. In most cases, managers can safely assume that demand is affected both by macroeconomic vari5 Components of Uncoated White Paper Making Up Total Demand (thousands of tons) End-Use Category Business Forms Commercial Printing Reprographics Envelopes Other Converting Total Demand Stationery and Tablet Books Directories Catalogs Magazines Inserts Labels Reviewed in Depth
Percent of Total 1985 Demand 25% 25 20 10 5 5 5 1 or less ables and by industry-specific developments. In looking at plain-paper copier paper, the team used simple and multiple regression analyses to test relationships with macroeconomic factors like white-collar workers, population, and economic performance. Most of the factors had a significant effect on demand. Intuitively, it also made sense to the team that the level of business activity would relate to paper consumption levels. Economists sometimes refer to growth in demand due to factors like these as an ‘‘outward shift’’ in the demand curve—toward a greater quantity demanded at a given price. ) Demand growth for copy paper, however, had exceeded the real rate of economic growth and the challenge was to find what other factors had been causing this.
The team hypothesized that declining copy costs had caused this increased usage. The relationship was proved by estimating the substantial cost reductions that had occurred, combining those with numbers of tons produced over time, and then fashioning an indicative demand curve for copy paper. See the chart ‘‘Understanding Copy Paper Demand Drivers. ’’) The clear relationship between cost and volume meant that cost reductions had been an important cause of past demand growth. (Economists sometimes describe this as a downward-shifting supply curve leading to movement down the demand curve. ) Further major declines in cost per copy seemed unlikely because paper costs were expected to remain flat, and the data indicated little increase in 6 price elasticity, even if cost per copy fell further.
So the team concluded that usage growth (per level of economic performance) was likely to continue the flattening trend begun in 1983: growth in copy paper consumption would be largely a function of economic growth, not cost declines as in the past. The team then reviewed several econometric services forecasts to develop a base case economic forecast. Similar studies have been performed in other industries. A simple one was the industrial components analysis mentioned before, a case where the total forecast was used as background but was not critical to the company’s strategy decision.
Here the team divided demand into its consuming industries and then asked experts in each industry for production forecasts. Total demand for components was projected on the assumption that it would move parallel to a weight-averaged forecast of these customer industries. Actual demand three years later was 2% above the team’s prediction, probably because the industry experts underestimated the impact of the economic recovery of 1984 and 1985. In another example, a team forecasting demand for maritime satellite terminals extrapolated past penetration curves for each of five categories of ships.
👋 Hi! I’m your smart assistant Amy!
Don’t know where to start? Type your requirements and I’ll connect you to an academic expert within 3 minutes.get help with your assignment