Haven't found the Essay You Want?
GET YOUR CUSTOM ESSAY SAMPLE
For Only $12.90/page

Identify the types of fault that can occur Essay

The computer is completely dead
A lot of machines are require you to press a power button on the back may sound bad and not many people try it so if it fails check the cable whether the fuse works you can test a fuse using a multi metre. If it does not work replace all the cable Computer keeps running on scandisk on start- up

This usually is a result because the computer was switched off incorrectly it is probable that the installation of windows is damaged. A re installation could be a possible solution. Computer seems to start up normally but nothing appears on the screen Again, as ridiculous as it may sound check the cable; it may not be attached probably. Another obvious solution is to try whether the monitor is switched on. Windows installing errors

Windows installer engine could be corrupted, installed incorrectly, or disabled this may cause installation issues. A reinstallation could well fix the issue but from a different source than the original download. Modem cuts off frequently

Possible solution, you may have a call waiting on your line you need to disable it to continue use of the modem Some programs like games don’t work on my computer
This could be numerous things one of the most common occurrences is due to the fact game developers only make high end specification games of late.
9 times out of 10 people buy games while having the assumption that they will work on their pc. You should buy only the games that are able to run on your pc. Or you can upgrade your pc so it’s more future prove.

Exe errors
The quickest and easiest risk free method is by using professional software; The two software applications i recommend are “Error repair” and ” XostspySE”
I’ve re-installed windows and my sound/video/modem/printer is not working correctly A possible solution is that the devices may not be set up correctly. Windows does not shut down correctly or it restarts when it should shut down After doing some research i fount out the best solution is to go to “RUN” and then type in “MSCONFIG” Then click on “advanced” and then tick/untick “Enable fast shutdown” The next stage is to re-start the computer and see if it shuts down. If proved un successful then try the BIOS and disable ACPI.

And this should resurrect the issue.
Dll error
There are numerous ways to fix DLL errors one way is to download a “DLL Repair tool” and follow these steps download the “Dll repair tool” click the “scan” button and then click the “repair” button to fix any errors. Another solution would be to re-install again.

Source technical information to provide advice and guidance for a variety of faults (P4) Practical: Your tutor will create a number of scenarios in which you have to source technical information to provide advice and guidance for a variety of faults. Complete an activity log to show what actions youtook; you might also be observed during this process.

Name of user
Jonah Rossy
Report date
11/04/2014
Machine identification details
76
Time to fix
15 minutes
Nature of fault
Computer seems to start up normally but nothing appears on the screen

Diagnosis/Fault found
The most usual problem with a computer but when the PC is actually does power on but doest display anything on the monitor. So when you see the lights on the computer case is probably hear fans running from inside, and may even hear sound but nothing shows up on the screen Remedial action taken

I have checked the monitor computer cable, and then i have cleared the CMOS, by clearing the BIOS memory on the motherboard will return the bios setting to their factory default level. A bios miss configuration could be why your PC wont start-up all the way. Resources used : http://www.hardwareanalysis.com/content/topic/15682/ Completed by : Bogdan Filipciuc

Date : 20/04/2014

Name of user
Maria Beloni
Report date
11/04/2014
Machine identification details
76
Time to fix
15 minutes
Nature of fault
The screen comes on ok when booting but unreadable when in windows

Diagnosis/Fault found
When the computer is booting on the display is unreadable.
Remedial action taken
Enter the BIOS; on Dell computer start pressing F2 button immediately booting your computer. In the BIOS use the down arrow to scroll to “Integrated Devices (Legacy Select Options). Press Enter Use down arrow to scroll to “On board Video Buffer”

Press Space Bar once to change from 1MB to 8MB
Press “Esc” to Exit
Press “Esc” to Exit again
Make sure that “Save Changes and Exit” is highlighted
Press “Enter”
Illegible Screen Problem Solved.
Resources used : http://www.hardwareanalysis.com/content/topic/15682/ Completed by : Bogdan Filipciuc
Date : 20/04/2014

Name of user
Maria Beloni
Report date
11/04/2014
Machine identification details
76
Time to fix
15 minutes
Nature of fault
A slow PC
Diagnosis/Fault found
The computer is running very slow
Remedial action taken
To fix the problem i have defrag the computer and also install and anti-virus, the virus have found lots of Trojans and now is safe. Also I have done all the updates and install a processor speed up. Resources used : http://www.hardwareanalysis.com/content/topic/15682/ Completed by : Bogdan Filipciuc

Date : 20/04/2014

Name of user
Maria Beloni
Report date
11/04/2014
Machine identification details
76
Time to fix
15 minutes
Nature of fault
Some programs like games don’t work on my computer

Diagnosis/Fault found
The games don’t work on the computer because of the display. Remedial action taken
Multiple displays, especially extended Desktops across different resolutions, can cause problems resulting in performance issues ranging from rare freezes to total failures. Often setting to run in Windowed Mode will get an instance going and depending on your video configuration and drivers/software you’re running getting a full screen instance up could be as simple as a check box option to clone displays in the Video control software

Resources used : http://www.hardwareanalysis.com/content/topic/15682/ Completed by : Bogdan Filipciuc
Date : 20/04/2014

Name of user
Maria Beloni
Report date
11/04/2014
Machine identification details
76
Time to fix
15 minutes
Nature of fault
Can’t get the pound sign to work other keys come up with the wrong Symbols?

Diagnosis/Fault found
The pound sign don’t work because the layout of the keyboard is American so it has to be changed in UK version or European Remedial action taken
To fix the problem I have used control panel -> regional and language options -> languages -> details first try ‘key settings’ and unclick the boxes to swap between keyboards. And the now you can get the sysmbols Resources used : http://www.hardwareanalysis.com/content/topic/15682/ Completed by : Bogdan Filipciuc

Date : 20/04/2014

Name of user
Maria Beloni
Report date
11/04/2014
Machine identification details
76
Time to fix
15 minutes
Nature of fault
Blue screen of death

Diagnosis/Fault found
A Blue Screen of Death, also called a STOP Error, will appear when an issue is so serious that Windows must stop completely. Remedial action taken
I have verified that a minimum amount of free space is available on your Windows partition. Blue Screens of Death and other serious issues, like data corruption, can occur if there’s not enough free space on your primary partition used for the Windows operating system. So I have to maintain at least 100MB of free space but I regularly see problems with free space that low. I usually advise Windows users to keep at least 15% of a drive’s capacity free at all times.

Resources used : http://www.hardwareanalysis.com/content/topic/15682/ Completed by : Bogdan Filipciuc
Date : 20/04/2014

Name of user
Maria Beloni
Report date
11/04/2014
Machine identification details
76
Time to fix
15 minutes
I’ve re-installed windows and my sound/video/modem/printer is not working correctly Diagnosis/Fault found
The sound, video, modem and printer don’t work
Remedial action taken
To fix the problem with the sound, video, modem and printer I have installed patches for each one and restart the computer and everything is working perfectly. Resources used : http://www.hardwareanalysis.com/content/topic/15682/ Completed by : Bogdan Filipciuc

Date : 20/04/2014

Judge the value of different sources of support material (M3) Having completed a number of fault finding activities set up by your tutor, judge the value and validity of different sources of support material to which you referred during the process. Present your findings as a referenced appendix to you fault records. Grading Tips: Make sure that you accessed a number of different sources for a given fault; don’t just rely on one source.


Essay Topics:


Sorry, but copying text is forbidden on this website. If you need this or any other sample, we can send it to you via email. Please, specify your valid email address

We can't stand spam as much as you do No, thanks. I prefer suffering on my own